MichiganGrower420 Posted January 26, 2014 Report Share Posted January 26, 2014 (edited) so i just bought a 16 site ez cloner and have a few questions. so to start off i added 3 gallons of spring water then i added 15.9 so almost 16 grams of clear rez i also added 1/4 tsp of general hydroponics rapid start rooting enhancer and i phd the water somewhere between 6.3-6.5 ph pen is on the fritz. as for the cutting i cut at a 45 decree angle and then i cut up the middle of the stem and put clonex rooting gel. also they have been in the cloner since thursday so they are 3 day old now. so here are a few questions that i have 1.how often should i check the ph and readjust when needed? 2. how often should i add the clear rez? also on the bottle it says add 1 ounce to 5 gallons so how much should i measure it out for 3 gallons? 3.there appears to be a build up by the sprayers of some white powder and some little spots in the bottom of the ez cloner dose anybody know what that may be? my option was i think it might be from the ph down or from the clear rez because i read that it has chlorine in it so i figured it might be one of them but im not sure this is my first time useing a cloner. 4.should i be adding any other nutes? i have the bontanicare line. 5.how far should the light be from the top of the clones? i also plan on getting a 4ft 4 bulb t5 this weekend. 6.how often should i change the water? 7.the ez cloner i bought did not come with an air pump but i have one should i put a air stone or 2 in the bottom of the ez cloner? would i benefit from it? 8.how will i know when roots start to develop what will they first start to look like? any help would be appreciated as this is only my second grow Edited January 26, 2014 by player1019491 saiweeleajede 1 Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.